Labnet Prism R Refrigerated Microcentrifuge Manuel d'utilisateur télécharger pdf (Page 8)

Prism R™ Refrigerated Microcentrifuge

3.3. Opening and Closing the Lid

The lid can be opened only when the centrifuge is powered on. Press

button to open the lid.

The lid will be locked automatically when the user presses down the

front edge of the lid.

Note: Do not slam the lid!

.4. Loading the Rotor

For safety reasons, the rotor must be loaded with centrifuge tubes

symmetrically. The difference in the weight between the tubes should

not exceed 0.1 gram.

The centrifuge tubes should be loaded in pairs opposite each other

and each should contain roughly the equal weight of sample. One or

two additional loaded tubes may need to be added to achieve this.

Please refer Figure 1 to see an example of a properly loaded rotor.

Attention: To reduce air friction and noise, the rot

or lid should

be attached to the rotor during centrifugation. Make sure that the

rotor lid snaps securely into place, by pressing down on center

catch.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Pas de commentaire

Labnet Prism R Refrigerated Microcentrifuge Manuel d'utilisateur Page 8